Check out some similar questions!
Need help changing a bulb in ceiling fan: bulb is out, fan is working, new bulb not
[ 1 Answers ]
Hampton Bay Nassau 52 in. Indoor/Outdoor Natural Iron Ceiling Fan Model # 58020 Hey there, trying to replace the bulb for this model and had no problem getting it out and the fan still operates,...
Correct voltage in light bulb socket, but bulb(s) won't light
[ 1 Answers ]
Regarding a 4-light kit on a residential ceiling fan (Hampton Bay). 20 A circuit, nothing else on in circuit (house is vacant). No wall switch; all switching done at fan/light kit (separate pull chains). Fan turns fine. 122 VAC as measured w/ a Fluke meter within light bulb socket. Have...
Dry bulb and wet bulb temperature
[ 1 Answers ]
Please let me know what is dry bulb and wet bulb temperature and how it is measured?
Upon installation of bulb, base of bulb burns and bulb never lights
[ 1 Answers ]
Installed two new 3 bulb post lights on concrete entry piers, one bulb pops and burns the base immediately upon installation... I have checked the wiring and everything is wired correctly, I assume ths is a bad bulb socket and the fixture is defective, has anyone had this problem before?
Does removing one bulb from a two bulb flourecent unit reduce cost?
[ 6 Answers ]
I am a General Manager for a company that has multiple large buildings. I have had it expressed to me by one of my investors that removing one of the two flourecent (32 Watt) bulbs from the unit will reduce cost by $30.00 a bulb a year! My simple understanding is that the ballast will run the same... View more questions Search
Add your answer here.
|