Ask Experts Questions for FREE Help !
Ask
    juleslavern12's Avatar
    juleslavern12 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 9, 2016, 08:20 PM
    New vessel sink without overflow, drains slow or not at all
    Have a copper sink without over flow, I changed the drain with a grid type and now it doesn't drain. Help!
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Mar 10, 2016, 05:57 AM
    Grid strainers should be illegal... simply don't work well on vessel sinks. Here, you could try to drill the holes in the strainer larger... I've seen it done and it does improve draining (see image for example). Otherwise, throw it out and install a new MUSHROOM or UMBRELLA style vessel sink drain (see 2nd image). These drains allow water to mix with air in a ratio that makes the drain very effective at clearing a sink quickly!

    Mark




    Name: vesselmushroom.jpg Views: 113 Size: 8.4 KB
    Attached Images
     
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #3

    Mar 10, 2016, 07:14 PM
    Well explained by Mark. Without overflow, drainage will be slow. Do as Mark suggested ( mushroom drain assembly ). That should solve your slow drainage problem

    Milo
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

New Vessel Sink without overflow drains slow [ 59 Answers ]

I installed a new vessel sink without an overfolw and it drains very slow. When I loosen a connection and let some air in it drains fine, just like it did with the original undercounter sink. So I assume I need to do something to compensate for the lack of an overflow. Any suggestions? Thanks.

Install Vessel sink and drain with overflow [ 4 Answers ]

I have a china vessel sink with overflow sitting on a granite top. The drain fits through the hole but if I use the cone gasket between the sink and the granite top, the sink will be elevated about 1/4 inch and will not sit flat. If I install the silicone cone gasket under the granite then...

I have a vessel sink with overflow. Water comes out of the side of the pipe. [ 1 Answers ]

What is supposed to prevent the water from coming through between the drain and the counter top and then on to the floor. The seals provided do not.

Vessel sink drains [ 4 Answers ]

Mark, thank you for the quick response. The first picture you sent me is a drain with overflow holes, can that be used with a vessal sink that does not have an overflow.

Vessel sink drains - roll top [ 2 Answers ]

I read a posting from IAMGROWLER about a "roll top drain" for use in Vessel Sinks posted April 2008. My question: Where do I find (to purchase) roll top drains?

View more questions Search