[2691semaj]

Model 67070-3004, kitchen sink and faucet combo. I am not getting any water at faucet.

[ma0641]

What brand faucet? Angle stops turned on?

[ballengerb1]

Sounds like this one Glacier Bay 67070 3004 Pull Down Sprayer Kitchen Faucet Stainless Steel Soap | eBay Chances are there is an installation error, these thing do not get out of the factory and don't let a drop get through. Like ma said, check the stops. How did you shut down your water to install the faucet?

[Milo Dolezal]

Do this:

1. To turn faucet ON, handle has to be pulled AWAY from the body of the faucet and to the FRONT or BACK
2. Clean Anti-Siphon device mounted on the pull-out hose under the sink
3. Clean Aerator
4. Make sure both angle stops are in OPEN position

Hope that helps

Milo

[SHEPLMBR70]

Make sure stops are on. Take aerator off and flush any junk out. If that doesn't work, disconnect the supply lines crack the valves on and flush any trash out of them. Sometimes when valves are off for a length of time junk can get dislodged.