Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
What to do if the kitchen facet won't come out
[ 2 Answers ]
I'm trying to install a new single kitchen faucet but the old ond will not budge there is rust on the under side which I've sprayed with CLR there is a semi circle flat disc around the under pipes to the faucet but there is no bolt as my new faucet What to do?
We have air in our hot water line in the kitchen.. there have been a few water breaks
[ 0 Answers ]
Thre have been several water breaks in our area(town problems) and it seems like the air in our kitchen hot/cold water line gets worse each time. It seems to be worse on the hot water side... it is OK in the rest of the home.What could be causing the problem. Thanks in advance for the answer.
Tempstar fan bumping on and off every couple of seconds
[ 1 Answers ]
Hello all, I have a brand new home in central Florida with a builder installed Tempstar heat pump. The fan is with the compressor in the outside unit and the air handler is inside the house. The model # is N4H342AKA200. The problem is when I turn the air on after the unit runs for 5 or so...
Smelly drains, horrible tasting water in master bath, kitchen
[ 2 Answers ]
Hi there, We live in a condo that is about 1 year old. There are 2 levels to our duplex, one is on ground level, one is below ground. There are 5 other units in the building. We live in Chicago, where the sewers are at street level. Don't know if any of that is important. Anyway, in the last 2... View more questions Search
|