 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Goodman electric furnace not heating enough
Model AURF364216 electric Goodman. No heat pump.
3 row coils New board, transformer, both sequencers, all wires are hooked up properly. Blows plenty of air. Nothing clogged. Vents aren't very warm. As it runs the coils never glow unless I flip the upper breaker off. But that shuts off the blower it runs forever just to raise the room temp 10 degrees. using roughly 00.150.00 kwh a day. really need a solution to this problem. |
||||
Check out some similar questions!
I had my oil furnace replaced with and electric furnace connected to an existing Heat pump. I have found that the installers have used the existing circuit control board to control the furnace. Is it standard procedure to install new board when installing a new electric furnace to replace oil....
I have a Goodman electric furnace,new last year.Heating element doesn't shut off when blowershuts off
I replaced the HSI today and it still doesn't seem to be working. There is a solid red light that begins to flash when the HSI fails to heat up. The blower seems to be functioning properly and the furnace won't begin operation until it the set temperature exceeds the room temperature ruling out...
Checked coils did`nt see any breaks or anything
Checked coils don't see any problems. Have voltage at coils
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
