Ask Experts Questions for FREE Help !
Ask
    antiqueauction's Avatar
    antiqueauction Posts: 7, Reputation: 1
    New Member
    		  
    #1

    Jan 17, 2016, 02:07 AM
    If my inducer motor is amping 71.5 what is wrong
    If my inducer motor is amping 71.5 what is wrong
    antiqueauction's Avatar
    antiqueauction Posts: 7, Reputation: 1
    New Member
    		  
    #2

    Jan 17, 2016, 02:17 AM
    If I need a new inducer motor on my Trane model 2YCX3030A1075AA What IS the Fasco #
    If I need a new inducer motor ( mine is Amping at 71.5 )
    On my Trane model 2YCX3030A1075AA
    What IS the Fasco #
    For the new one to order it

    Thanks in Advance
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
    		  
    #3

    Jan 17, 2016, 05:44 AM
    Please check your model number again as I could find no matches,

    Trane Products By Model Numbers - Jones Air Conditioning: (239) 596-5855 Naples, Bonita Springs, Marco Island 24 Hour Air Conditioning Service, Repair & Replacements

    And the parts look up is here

    http://www.repairclinic.com/vwo10/Sh...-Furnace-Parts

    A portion of your search was successful, but 2ycx3030a1075aa did not match anything.

    This link may also be helpful,

    http://internal.trane.com/residential/for-owners
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #4

    Jan 17, 2016, 11:31 AM
    Doubt 71.5 Amps, are you sure it's not 7.15? At 71.5 amps, the wires would have been burnt out and the board fried. Your heater circuit is probably protected by a 15 Amp breaker, how can you get 71.5 through it?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I took off inducer motor mounting bolts but can't pull motor out [ 2 Answers ]

I can't pull out inducer motor for bryant plus 90 furnace. I have mounting bolts off but shaft is holding me mack. How do I get it to release?

Inducer motor [ 0 Answers ]

The inducer motor/fan runs continuously after the A/C cycles off

What is a inducer motor [ 1 Answers ]

What is a inducer motor

Inducer motor? [ 1 Answers ]

When I turn my thermostat on at first I hear a humming then it blows hot air then cold air. I was told I need an Inducer motor? Does that sound correct?

What is the inducer motor [ 3 Answers ]

I have a bryant 395C gas furnace and the inducer motor assembly is making noise. The motor seems fine and the furnace operates normally, but there is a plastic wheel attached to the end of the motor that is rattling when the motor runs. I've looked at pictures of many inducer motor...

View more questions Search