If my inducer motor is amping 71.5 what is wrong

If I need a new inducer motor ( mine is Amping at 71.5 )
On my Trane model 2YCX3030A1075AA
What IS the Fasco #
For the new one to order it

Thanks in Advance

Please check your model number again as I could find no matches,

Trane Products By Model Numbers - Jones Air Conditioning: (239) 596-5855 Naples, Bonita Springs, Marco Island 24 Hour Air Conditioning Service, Repair & Replacements

And the parts look up is here

http://www.repairclinic.com/vwo10/Sh...-Furnace-Parts

A portion of your search was successful, but 2ycx3030a1075aa did not match anything.

This link may also be helpful,

http://internal.trane.com/residential/for-owners

Doubt 71.5 Amps, are you sure it's not 7.15? At 71.5 amps, the wires would have been burnt out and the board fried. Your heater circuit is probably protected by a 15 Amp breaker, how can you get 71.5 through it?