Ask Experts Questions for FREE Help !
Ask
    fishnugget's Avatar
    fishnugget Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 16, 2016, 06:25 AM
    Can't get shower arm loose from wall
    I have repeatedly sprayed with lime away and wd40. Arm still does not loosen. I am afraid to turn too hard. I don't want to break pipe in wall. I cant seem to get a good grip with pipe wrench. I cant afford to replace tiling on shower wall if I break something.


    Any tips?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Jan 16, 2016, 06:53 AM
    Are you planning on reusing the shower arm?

    Will the shower move inside the wall. That is will it move in and out of the wall?
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
    		  
    #3

    Jan 16, 2016, 08:01 AM
    Is this what you mean or is it another type?

    If so click on an image to copy and paste and give us an idea of your problem. https://www.bing.com/images/search?q...ms&FORM=IQFRML

    Does it have a plate behind it? Can you remove it if it does? Exactly what are you spraying WD40 on... a fittings?
    Mike45plus's Avatar
    Mike45plus Posts: 230, Reputation: 27
    Full Member
    		  
    #4

    Jan 16, 2016, 08:55 AM
    Fish,
    You can gain some mechanical advantage and prevent marring / scratching the arms finish by inserting a tool into the end where the shower head is attached - remove the head, gently screw on a brass or steel coupling ( 1/2" ips ) by hand, and insert the handle of your channel lock pliers 2 to 3 inches. Make sure to turn counter clockwise...
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Shower Arm Plastered to Wall [ 5 Answers ]

I just moved into a new home and the shower head is too low for my family. We bought a new one that raises the shower head up by about a foot. Took off the wall plate and it looks like the old shower arm is plastered all the way around the hole. Basically it's the shower wall (tile) with a hole cut...

Will a shower arm take the weight of a shower filter? [ 6 Answers ]

I've just bought a shower filter, which is designed to fit between the fixed shower pipe coming out of the wall in the shower cubicle and the shower head. The shower filter I've bought is the one below, and the tab which shows the filter in use clearly shows it in situ between a shower pipe and...

Rocker arm came loose [ 5 Answers ]

I have aDR lawn vacuum, was running then stopped.I found the intake raocker arm came loose. I put it back on and it runs like a champ. Is there something I have to adjust or fix so it doesn't happen again?

I need help replacing a shower arm how far back into the wall does the shower arm go [ 3 Answers ]

I was going to replace my shower head when I realized there is no male end of the shower arm connecting to the showerhead instead there is a ball inside the showerhead that connects to the shower arm. There is no way to disconnect that from it. I wanted to try to replace the shower arm with a new...

Water comes out of shower valve but not shower arm... help! [ 2 Answers ]

Hi all, I just installed the upgrade kit to convert my Delta Monitor 1500 to a Monitor 1700 and after assembling everything I am getting zero water out of the shower. When I turned the water on when I was finished there was very weak pressure and then it stopped completely. When I remove the...

View more questions Search