Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Tub drain plunger separated from trip lever assembly
[ 1 Answers ]
I had a plumber fix a tub drain plunger. Apparently, instead of fixing or adjusting the old type (lever to visible stopper), he must have replaced it with a newer type (lever to internal stopper). Problem is that the lever is now disconnected from the internal stopper. The eye hook at the bottom of...
Plunger in tub drain is stuck
[ 3 Answers ]
My bath tub has a plunger type drain that seems to be stuck in the up position. I noticed this happening in a different bath tube and removed the plunger. I then used steel wool and cleaned it up. With this tub I can't get the plunger "un-stuck" to be able to remove it. I would imagine it is...
Fixing leaking tub drain
[ 1 Answers ]
Hello, I have recently leased an old house in which to start a business. Discovered that the drain from the bathtub on the second floor is leaking and causing the celing below it to get soggy and also leaks all the way down the pipes into the basement. Repairing it will mean tearing out the...
Plunger tub drain
[ 9 Answers ]
I have a plunger tub drain. We have never been able to engage the drain because the lever is locked in the down (open) position. I purchased a new overflow/lever housing because I thought the spring may have been bad. I just went to install it and the lever still won't go up! Could there be a...
Tub plunger drain stuck
[ 2 Answers ]
Tub drains slowly, forms regular clogs. Many Chemical solutions have already been wasted. :( Have removed overflow plate/plunger lever. Plunger linkage will not come out of pipe. Metallic sounding resistance is met inside the first inch of pull out. I have pulled very hard and gained no... View more questions Search
|