Ask Experts Questions for FREE Help !
Ask
    DeborahRose's Avatar
    DeborahRose Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 7, 2016, 09:56 AM
    Is there a continuous setting on carrier furnace.
    Does anyone know if there is a continuous fan setting on carrier furnace that we can turn on. My hubby discovered in order for our Life Breathe HRV to work properly the fan must run steady to work properly. I know in the summer time turn just the fan on without heat sometimes, but it is winter now and we need our heat but the fan also to keep running with HRV.
    Also does anyone know how to trouble shoot the mother board on the Carrier furnace to see if it is working properly. Thank you kindly. Deborah..
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Jan 7, 2016, 10:53 AM
    If you have a programmable thermostat it should have a setting for that on it. Been so long since I've seen a non-programmable one I don't remember if those had it or not.
    DeborahRose's Avatar
    DeborahRose Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Jan 7, 2016, 12:21 PM
    Quote Originally Posted by smoothy View Post
    If you have a programmable thermostat it should have a setting for that on it. Been so long since I've seen a non-programmable one I don't remember if those had it or not.

    Thank you very much Smoothy.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #4

    Jan 7, 2016, 03:26 PM
    Should be a fan ON selection on the thermostat. If there is a failure on the board, the unit will n ot work or will send a flashing error code, visible on the board.
    DeborahRose's Avatar
    DeborahRose Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Jan 7, 2016, 04:33 PM
    Quote Originally Posted by ma0641 View Post
    Should be a fan ON selection on the thermostat. If there is a failure on the board, the unit will n ot work or will send a flashing error code, visible on the board.

    Thank you ma0641
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Carrier Weathermaker 8000 AC continuous function [ 1 Answers ]

Hello,I have a: Carrier Weathermaker 8000 model 58WAV070-12 s/n 4999A11255 Carrier Tech 2000 compressor.For the past two days I've had these intermittent problems:The AC fanand compressor run continuously cooling the house down to 69 degrees. Thethermostat makes the appropriate noise as the...

Carrier model 58STX070- motor blower not functioning, regardless of setting. [ 0 Answers ]

No air is coming in through vents, regardless of heat or fan only setting. Turn off switch that powers furnace, and opened it. Turned it back on, you can hear humming, meaning power is going through. Status LED is on. Motor not moving, but feels hot to the touch.

Carrier keeps blowing 5 amp fuse in heat setting [ 2 Answers ]

Crappier... er... Carrier Unit has blown 2 fuses in two days on heat setting. Fuse is in main blower housing. Is this a short? Any ideas? Thanks, Frustrated and Freezing...

How to adjust auxiliary heat setting on Carrier? [ 4 Answers ]

I have a heat pump with propane auxiliary heat. It has a carrier programmable Thermostat #960-120032-2. It was programmed for backup heat to come on at 40 degrees when it was installed and I Would like to reset it to a lower setting. I have read the manual and it makes no mention Of this...

View more questions Search