Ask Experts Questions for FREE Help !
Ask
    BBDP's Avatar
    BBDP Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 3, 2016, 07:20 PM
    Shower handle set screw removal on Delta 413763
    I have a delta single handle shower handle I need to remove. I do not know how. The two screws in the cover plate are easy. But there is a tiny access hole which I presume is locking in the handle. Some type of set screw. I do not know how to proceed. Advice would be much appreciated.
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
    		  
    #2

    Jan 3, 2016, 10:39 PM
    Get an allen wrench set and remove the set screw.



    Why are you removing the handle?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I remove the handle of a aquasource garner shower unit with no set screw [ 0 Answers ]

I just installed a new aquasource single handle shower faucet. I would like know how to remove the handle so I can adjust the hot water.

Can't get handle off a Delta Monitor shower faucet? I loosened the allen screw [ 4 Answers ]

Delta Shower handle removal problem [ 2 Answers ]

Similar to 2008, but I have removed the set screw! I just can't pull or pry off the handle and don't want to break anything using too much force. Any suggestions? Warren

Delta Monitor 1400 Series shower handle removal? [ 5 Answers ]

I am attempting to repair a leaky Delta Monitor 1400 single handle shower assembly. I have removed the Allen type set screw, but the handle won't slide off, even with considerable pulling. I have pulled fairly hard, and am afraid to apply too much pressure, as I don't want to damage the plumbing to...

Delta single handle shower removal [ 2 Answers ]

I have to replace a cartridge in a delta single handle shower. It is a one piece lever. It has a set screw on the inside bend of the handle. I have removed the set screw and the hard water corrosion will not break allowing the handle to pull off. I have tried boiling hot vinegar, along with a...

View more questions Search