Ask Experts Questions for FREE Help !
Ask
    WarrenCH's Avatar
    WarrenCH Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 17, 2012, 04:02 PM
    Delta Shower handle removal problem
    Similar to 2008, but I have removed the set screw! I just can't pull or pry off the handle and don't want to break anything using too much force.

    Any suggestions?

    Warren
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #2

    Aug 17, 2012, 04:26 PM
    Take screwdriver with plastic handle and gently keep tapping the handle at left, than at right and so fort. In the meantime, keep pulling on handle. It will take few minutes but it will snap loose. Back to you. Milo
    WarrenCH's Avatar
    WarrenCH Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Aug 17, 2012, 06:10 PM
    Milo:

    Great! Worked well, especially after rust remover / desolver and tapping.

    Now can't get the bezel ring off. So trying the same thing and waiting for a pipe wrench: I had one more "phone a friend" so I cashed in.

    Problem now is how to hold the turning ring with one tool and secure the smaller body part on the inside. I think 2 pipe wrenches or combination of pipe wrench and another. Once that is done I guess I'll have my Delta 1400 merit badge, thanks to your help!

    Warren
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Delta Monitor 1400 Series shower handle removal? [ 5 Answers ]

I am attempting to repair a leaky Delta Monitor 1400 single handle shower assembly. I have removed the Allen type set screw, but the handle won't slide off, even with considerable pulling. I have pulled fairly hard, and am afraid to apply too much pressure, as I don't want to damage the plumbing to...

Hello. I am trouble shooting a Delta single handle shower problem. The shower is [ 3 Answers ]

Hello. I am trouble shooting a Delta single handle shower problem. The shower has a diminished flow and over the past 6 months or so has become so hot that it appears that the cold water flow has been restricted or cut off. I think my solution is to replace the cartridge (I think Delta RP19805)...

Delta monitor 1400 bath valve handle removal [ 1 Answers ]

Delta 1400 bath Valve handle will not come off. Set screw has been removed. Soaked in WD40, soaked in white Vinegar solution. Still will not come off. Handle is 2 pieces. Half of the handle unscrews and removes but main base of handle will not pop off Any help would be appreciated

Delta single handle shower removal [ 2 Answers ]

I have to replace a cartridge in a delta single handle shower. It is a one piece lever. It has a set screw on the inside bend of the handle. I have removed the set screw and the hard water corrosion will not break allowing the handle to pull off. I have tried boiling hot vinegar, along with a...

Where to Buy Delta Shower Handle? [ 2 Answers ]

I have been looking EVERYWHERE to buy this Delta Shower Handle ONLY. The previous owners must have taken the handle before they left, and I do not have the handle for the showers at my Condo. :eek: Someone please help me locate a place to buy the handle (#1 and #2 in the attached picture) at an...

View more questions Search