Ask Experts Questions for FREE Help !
Ask
    Sausage Fingers's Avatar
    Sausage Fingers Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 31, 2015, 01:09 PM
    Am. Std. Freedom 80. Blower keeps blowing. Is board bad?
    I have an American Standard Freedom 80 Furnace. The blower blows long after the burner stops and blows cold air. I know the blower should blow for a little while but it does not stop. The burner(s) will relight after it recycles, and heat the house again. I did change the filter, so I know its new and I even cut the juice to the unit to reset the board, but no help. Do I need to replace the (White Rodgers) control board?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Dec 31, 2015, 04:31 PM
    Suggestion.

    Trace fan wiring. Does it go through a limit switch?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Payne house ac blowing hot air-outside blower/fan working but blowing out cool air [ 0 Answers ]

My central a/c unit is blowing hot air. The outside unit & fan seems to be working but cool air is blowing out of the unit. The unit was working fine most of the day. A circuit breaker was tripped and the outside unit stopped working. I reset the breaker and the outside unit started working again...

Can you direct wire a humidifier to an Amer Std Freedom 90 furnace? [ 0 Answers ]

Can I connect a Honeywell HE360 humidifier directly to an Amer Standard Freedom 90 (Single-Stage) furnace PC board w/o installing the humidistat (I don't need to adjust the humidity) and sail switch? The furnace PC board does not have any obvious terminal markings such as "HUM" for humidifier. ...

Connect Honeywell HE360 directly to Amer Std Freedom 90? [ 0 Answers ]

Thanks. I wasn't clear enough on my Q. I want to know how (if) I can connect the humidifier directly to the furnace PC board w/o installing the humidistat (I don't need to adjust the humidity) and sail switch. The furnace PC board does not have any obvious terminal markings such as "HUM" for...

45692-001 blower control board will not turn blower on in either heat or cooling mode [ 2 Answers ]

Armstrong G1N80 furnace blower control board will not turn on fan at all. Not in heat or cooling mode. I can hear a click when fan should be energized, but no fan startup. Pigtailed the fan hot and neutral,and fan works fine. Is this just a blower control board problem, or something else? We had...

View more questions Search