Ask Experts Questions for FREE Help !
Ask
    mark84604's Avatar
    mark84604 Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 2, 2015, 09:58 AM
    Multple connections to single pole switch
    I have a battery that is connected to a light switch (single pole) I also have an inverter and charge controller connected to the same light switch. I want to be able to turn the inverter and charge controller off with the light switch so that it doesn't drain the battery when it is not in use. Can I do this with the one light switch?
    cdad's Avatar
    cdad Posts: 12,700, Reputation: 1438
    Internet Research Expert
     
    #2

    Nov 2, 2015, 11:04 AM
    Do you have any kind of diagram for this circut and also what are the loads involed as well as voltages.
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
     
    #3

    Nov 2, 2015, 02:40 PM
    Is there a reason it HAS to be a single one pole switch? And why would you be using a battery to run a light when there is power available to charge the battery when its in use? And why would you not want it to keep the batter charged when not in use?

    What you are trying to do doesn't make sense to me.
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
     
    #4

    Nov 3, 2015, 12:47 PM
    Certainly.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Adding new switch to box with a 3-way and single pole switch? [ 3 Answers ]

I am adding a shower light to our bathroom, which currently has a 2 gang box with a 3-way switch for the fan, and a single-pole switch for the main (wall) lights. Can someone provide instructions and/or a diagram on how to wire the switches in the box? There are currently 4 wires running into the...

How to wire a single pole switch to a single grounded receptacle? [ 3 Answers ]

I have 2 15amp single pole light switches that have just 2 brass screws and a green grounding screw on them and I have 4 15amp 125v grounded single receptacles that I want to wire up for my light switches to operate 4 sets of fluorescent lamps which already have plugs on them and one that has a...

How do I make a 3way switch into a single pole switch? [ 4 Answers ]

I have 2 bedrooms that I am trying to install new light switches in. They both had dimmer switches in, now I just want regular flip switches. The problem is that Room A seems to want to be a 3-way switch with room B. There are 3 black wires in the electrical box. Right now, with the dimmer...

Double pole or single pole switch 4 reversing fan [ 4 Answers ]

I currently have a switch for my fan and another one for my fan light. I would like to reverse the fan movement. Would I use a double pole double throw or a single pole double throw switch?

Trying to change a single pole light switch to a single pole swith with a light below [ 5 Answers ]

I have a kitchen light and a basement light that are together in one electrical box, but are on single switches. I purchased a "single pole switch and pilot light" combination so I could see easily if the basement light is on. In the box there is a black, red and white wire. For the single pole...


View more questions Search