Ask Experts Questions for FREE Help !
Ask
    SKEETER50's Avatar
    SKEETER50 Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 24, 2015, 11:18 PM
    Thermostat won't heat
    Have a honeywell wall thermostat for ceiling heat. I get a "click" when I turn the knob up for heat. When I checked with my electric sensor it read power in the circuit until the "click". Then the indicator registered no power.
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
     
    #2

    Oct 26, 2015, 11:27 AM
    Where do you hear the "click"... in the thermostat?
    What are you using as an "electric sensor"? There are lots of ways to check circuitry.
    Without knowing anything about your heat system there is no possible way to diagnose it from your lack of details.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heat pump thermostat won't turn off [ 0 Answers ]

I have a Trane heat pump controlled by a Honeywell thermostat (model #TH3210D104). I am having a problem with the heat pump warming the house to the normal setpoint for comfort (say, 70 or 71) during the day but the heat pump continuing to run. By continuing to run, I mean the whole system,...

Thermostat clicks but heat won't come on? [ 2 Answers ]

The power went off and when it came back on, the heater will not come on. I replaced the batteries in the thermostat and it clicks when I turn it on but nothing comes on. Any idea? I checked the breaker box and breaker to heater is on,

Thermostat won't shut heat off? [ 1 Answers ]

I have a forced air HVAC unit that gets heat from the hot water tank. There is no limit switch on the fan -- it comes on with the heat. Last week the thermostat would not shut off the heat whether I reduced the temperature setting or switched it off. When I switched it to cool, both the heat and...

Thermostat won't turn off heat at night [ 3 Answers ]

Hi, I have a programmable thermostat that is set at 68 at night. Lately it has not been kicking off and the heat continues to run up to around 78 or so. This only seems to happen overnight. This started last spring, and now that I'm using the furnace again - it's doing it again. And it didn't...

Heat won't cut out on my thermostat [ 2 Answers ]

I need any type of information about a Noma 5+1+1 programmable thermostat. We have it programmed and set for temperatures and times but it doesn't work. Its always cold. But there's a switch that says "cool/off/heat" When I set it to heat the furnace won't cut out and the heat won't stop. When I...


View more questions Search