Ask Experts Questions for FREE Help !
Ask
    Tigernewfie's Avatar
    Tigernewfie Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 4, 2007, 12:53 PM
    Heat won't cut out on my thermostat
    I need any type of information about a Noma 5+1+1 programmable thermostat. We have it programmed and set for temperatures and times but it doesn't work. Its always cold. But there's a switch that says "cool/off/heat" When I set it to heat the furnace won't cut out and the heat won't stop. When I turn to off there is no heat coming out. There is another button for man/auto and ia m not sure if they work together or not. But if I have to keep turning the heat on and opff it defeats the purpose of a prgrammable thermostat! Can anyone help me with this? Please
    J Costa's Avatar
    J Costa Posts: 88, Reputation: 9
    Junior Member
    		  
    #2

    Oct 4, 2007, 04:56 PM
    If Iam understsnding you correctly you say there is no heat when you turn it on but it just stays cold in your house then when you turn it off it will not the fan will not turn off. Yes the auto and fan run with the heat If you have it on on the fan will never shut off until you put it to auto. You should choose the auto selection so it will cycle on and off with your thermastat. Need more info on what kind of unit you have to try and help you with no heat coming out.
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
    		  
    #3

    Oct 4, 2007, 07:15 PM
    Does it have a ''Run PGN button? Try it. If that doesn't work, you will need to read the instruction manual. If you don't have one, see if you can find one on their web site.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

WeedEater Cut through Wire on outside AC Unit and now AC or Heat will not turn on [ 9 Answers ]

Ok, my weedeater cut and tangled around two small wires running from the back of the outside AC unit into the house. I am thinking this is the thermostat wire. The two wires are red and white running from the house. The two wires from the AC unit that seem to be connected to the red and white...

NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue. [ 11 Answers ]

I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -

Heat/ac thermostat [ 1 Answers ]

I have a mechanical thermostat, when you set it at the temp you want say 70 degrees, it will not kick the a/c at that temp, you have to manually move the temp setting to about 85 degrees. The cooling works fine it just will not kick off. I have cleaned the thermostat what should I try next?

Thermostat heat/ac [ 5 Answers ]

I think the control inside your home that turns Heat and A.C up and down is called a thermostat. Having said that I wanted to know if it is a big job to replace one? The one I have is only about 2 years old but it never worked right and I want to replace this one myself. I do a lot of things...

Heat Pump Thermostat [ 1 Answers ]

I have a Heat Pump by Unitary Products, Model F2FP036N06B with a White-Rodgers thermostat, Type No. 1F89-11. The 5 amp fuse controlling the thermostat has blown three times in the last 24 hours. After replacing the fuse, everything seems to work normally for a few hours before it blows another...

View more questions Search