Ask Experts Questions for FREE Help !
Ask
    horizontwo1's Avatar
    horizontwo1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 23, 2015, 09:07 AM
    Hot tub wiring advice
    Wiring in a hot tub with a 220V/50Amp 4 wire system setup. Need advise on what type of wire to use, currently looking at 8-3. Also want to hear suggestions on what type of breaker I should have.
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #2

    Aug 23, 2015, 09:36 AM
    Well the breaker can be either a 240V 50 amp breaker or a 240V 50 Amp GFCI breaker.

    For 50 amp, you will need #6 AWG four wire cable.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #3

    Aug 23, 2015, 12:01 PM
    A hot tub is not a place for someone with little experience to do wiring.
    You are asking very basic questions here. What is your experience with wiring?
    hfcarson's Avatar
    hfcarson Posts: 1,003, Reputation: 49
    Ultra Member
    		  
    #4

    Aug 24, 2015, 06:45 AM
    you "must" install in accordance with the manufacturer's installation instructions...
    this is required by the code. Read the instructions first, then ask questions.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Advice for hooking up a hot tub on a 100amp subpanel, 200amp service. [ 4 Answers ]

Hi- Hopefully I explain my situation well enough. I recently bought a inexpensive used hot tub to help with my always increasing 40 yr old pain. Lol. The hot tub is a Hydro Spa by all of my Google research, 5-6 seater, 220v, but I do not know a model number or style name, and it cannot be found...

Wiring a hot tub [ 2 Answers ]

My hot tub was wired for a 240V line in the previous owners location. Looking at the wiring diagram, and in the control box itself, I see that it can be fitted with a 120V line instead (provided the 120V line is on it's own circuit). The manual I have is generic so it doesn't go into how to...

Wiring a hot tub [ 1 Answers ]

I picked up an older 2-3 person hot tub. Spa is the brand. I have not manual for the spa. The motor on the pump says Volts 115, AMPS 16.4/4.4, HZ 60, RPMS 3450/1725, AMPS 40 C. There is a 30 breaker in the wiring box that goes to the thermostat, motor and the on/off switch. What size wire...

Hot Tub wiring [ 4 Answers ]

Hello, As per my post in the Hot Tub forum (https://www.askmehelpdesk.com/pools-spas-saunas/hooking-up-hot-tub-why-would-there-no-ground-148047.html), I am working on installing a spa. I have already purchased 6 gauge THHN for the 130' run, but I'm beginning to second guess myself on whether...

Hot tub wiring [ 1 Answers ]

I'm wiring a subpanel for my hot tub. I know the white wire from the breaker goes to the neutral bar, but does the neutral wire from the hot tub connect to the neutral bar or the neutral terminal on the GFI breaker?

View more questions Search