 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Boiler pressure to low and high
I have an older millivolt natural gas boiler. I used to have an expansion tank that was aprox 2 ft long by 15 in, in diameterand when it got too full I just hooked a water hose to it and drained it, it worked well, but it got a hole in it so I had to replace it.The one the plumber sold to me was the smaller air precharged one . The pressure really fluctuates between 5 psi (when cold) to 25 psi (when hot). The old one never done that. Can I still get the older style tank or do you have eny other recommendations
|
||||
Check out some similar questions!
Hi my vokera boiler is low in pressure when I turn the water pressure tap on no sign of water
Our dodge stratus 2001 air was cooling and then not cooling then cooling again Took it to our mechanic he said he did not know how to repair. The compressor was good, but the high pressure line is now low pressure, and the low pressure has highest pressure, he said he did not know what was causing...
We have a fire tube boiler in sulfur recovery unit.pressure of it is 5.5 barg.PH of it is 7.4-8.we can't increase PH of it.what can we do?
By boiler is reading the maximum pressure and I am not sure how to release the pressure if you know please let me know thanks stevie
I have an 80-year-old house in which I replaced the gas furnace in 1995. In a routine seasonal check up a contractor has told me that the pressure is running too high. The pressure went up to 30 PSI at 150 degrees Fahrenheit. Later in the day the pressure was found to be 22 PSI at 120 degrees F....
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
