Ask Experts Questions for FREE Help !
Ask
    ppap's Avatar
    ppap Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 20, 2015, 11:44 AM
    Kenmore elite 630 dishwasher won't power on after diagnostic test was preformed
    Kenmore elite 630 dishwasher won't power on after diagnostic test was preformed. There is power to the unit as it will still enter diagnostic mode but no lights go on when on/off button is pushed. I cannot run a cycle.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Aug 21, 2015, 11:52 AM
    Look at this and some related ones: https://www.youtube.com/watch?v=flzhfmIIYpM
    Here are some manuals: https://dl.dropboxusercontent.com/u/...ishwashers.zip
    Get a good meter and you will be able to diagnose it. I suspect that you have some bad capacitors on the circuit board like all the others failing the same way. They have had a problem with bad capacitors in Taiwan since the late 1980s when they thought a stolen formula from Japan for making them was right, but they did not have the final secret step, resulting in disaster time delayed for years.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Dishwasher has power but does not start [ 2 Answers ]

Hello, I have a Kenmore Elite Dishwasher model number 665.13773K600. I noticed this morning a little standing water in the tub. I pressed the drain button on the keypad. The light came on, but nothing happened. I then attempted to run the dishwasher through a cycle. Keypad responds, but dishwasher...

Kenmore elite dishwasher diagnostic check [ 0 Answers ]

Model #66516592201 Kenmore Elite Dishwasher --- no matter what setting I use it will get to 78 min. and just stay there forever! I notice that some of you talk about pushing buttons and resetting the control panel. What would you suggest? HELP!!

Kenmore elite dryer 110.60936990 Diagnostic test [ 0 Answers ]

My dryer goes on and off constantly but heats up first. What could the problem be?

How do I run a diagnostic test for kenmore elite he3 gas dryer? [ 1 Answers ]

How do I run a diagnostic test for kenmore elite he3 gas dryer?

How do I run a diagnostic test for kenmore elite he3 gas dryer? [ 0 Answers ]

I have had a Kenmore Elite he3 gas dryer for 6 years. It suddenly would not start. The "clean lint" lite keeps flashing. I vacumed all vents, took off the back vent, vacumed the dryer and the wall vent. I washed the screen and it still will not work. Is there a diagnostic test I can run? All...

View more questions Search