Ask Experts Questions for FREE Help !
Ask
    njsx's Avatar
    njsx Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 10, 2015, 09:32 AM
    Bolts for Glacier Bay pedestal sink
    Seeking replacement bolts for a Glacier Bay pedestal bathroom sink (white) to attach it to the wall.
    njsx's Avatar
    njsx Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Aug 10, 2015, 09:44 AM
    Seeking replacement bolts for a Glacier Bay pedestal bathroom sink (white) to attach it to the wall. There are several different numbers on the sink: Z105; 85088; S968. It is 20" from wall to the outer edge where a user stands, 24 inches wide (from side to side) and 6.5" deep. The original bolts have disappeared so I don't know what to get to replace them. Thanks for any help (August 10, 2015).
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Aug 10, 2015, 11:56 AM
    Assuming there are no mounting plate or nuts in the wall. I would use a Toggle bolt, one on each side. Set the sink on the pedestal and mark the wall. You could go to HD and see what the display looks like.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Where can I get mounting brackets for my glacier bay sink [ 2 Answers ]

I purchased an I-855 HD glacier 633-264 sink from Home Depot several years ago but it didn't come with mounting brackets. The sink has been wobbly and I would like to reinforce it. Thanks, Joyce Isaacson

Problem with glacier bay kitchen sink faucet [ 1 Answers ]

Glacier Bay model 166113L I have a single handle kitchen faucet. The base has ceased up and I can no longer Move the tap from either side of a double sink. I cannot separate the part that is Closest to the base and under the spout section which is where the problem seems To be I...

How to get handle off a Glacier Bay Kitchen Sink [ 0 Answers ]

Just installed a whole house water softener system. Clogged some of my faucets and toilets. Glacier Bay Kitcen (can't find the brand number) faucet has just a trickle. Cleaned aerator, took out fittings and valves underneath but can't get the handle off. How do you remove handle from a GB Kitchen...

Have installed cartridge for glacier bay kitchen sink and now the water will not run, [ 1 Answers ]

Fixed leak in kitchen sink by adding a new cartridge and now there is no hot or cold water. Just stopped working. Why?

Glacier Bay Kitchen Sink Faucet [ 2 Answers ]

I have a Glacier Bay kitchen sink faucet, it's getting really loose. Is it possible to get the installation instructions, as I have misplaced mine when it was installed 2 years ago. Thanks, D. Rolstad [email protected]

View more questions Search