[joey246]

Glacier Bay model 166113L

I have a single handle kitchen faucet. The base has ceased up and I can no longer

Move the tap from either side of a double sink. I cannot separate the part that is

Closest to the base and under the spout section which is where the problem seems

To be I believe that replacing the O rings will solve the problem but I cannot get

At them. Any help would be appreciated.

[massplumber2008]

Hi Joey

Replacing the Orings AND using some silicone grease on them will give you the best result.

I couldn't pull up your specific faucet so can only advise you to get the spout itself up and off the valve... that will expose the Orings.

If you can post a picture I could probably tell you more.

Good luck!

Mark