Ask Experts Questions for FREE Help !
Ask
    Theresajake's Avatar
    Theresajake Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 15, 2015, 06:03 PM
    I have a vertical cast iron pipe that is 7 ft away from where I am putting new toilet
    I have a vertical cast iron pipe in my basement that is 7 foot away from where my new bathroom and toilet will be. How do I get a safe angle without going through the middle of my basement--do I need to cut the cast iron pipe shorter and use pvc? Help I'm confused as to how this all works. Thank you!
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jul 15, 2015, 07:35 PM
    Is this the vent? Can you sketch out where things go. I can't figure out what you are trying to connect. Is the pipe below what you are draining or is everything on the same level?
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #3

    Jul 16, 2015, 08:47 AM
    Photo would help

    Milo
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Cast iron toilet pipe [ 2 Answers ]

I have a ci pipe that appears to be one piece, meaning the pipe and flange are one. Can this be the case? Or is it so corroded I can't tell? Replacing a toilet. If I knew how to imbed I picture I would. Thanks.

Cutting cast iron waste pipe under toilet in basement [ 2 Answers ]

Where should I cut the cast iron pipe. I want to replace the cast iron toilet flange and covert the iron pipe to pvc from just before the elbow going up to the toilet. My friend suggests using a soil cutter 6 inches before the elbow. Thanks JF

Baement toilet, 3 inch cast iron pipe, unlevel floor [ 2 Answers ]

Want to install a toilet in my basement. I have a cleanout in the area I want to put it but the floor isn't very level. The clean out is 3" cast iron.

How do I seal pvc toilet flange to cast iron drain pipe [ 1 Answers ]

Just bought a house with damaged toilet. Existing plumbing is pvc toilet flange inserted into cast iron drain line. The flange is loose and needs to be refastened to the floor, subfloor condition permitting . How do I seal the pvc toilet flange to cast iron drain pipe to ensure no sewer gas leak?

Cast iron vertical from cast iron horizontal can be pvc? [ 2 Answers ]

A leak developed in the main cast iron vertical stack of pipes leading to the horizontal main drain. Unfortunately, for me, the leak was so close to the ground that I had to break the concrete slab of the house. At that point, it just made sense to dig an extra 4 inches or so and remove the bad...

View more questions Search