Ask Experts Questions for FREE Help !
Ask
    miked996's Avatar
    miked996 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Jul 4, 2015, 04:59 PM
    Drag link for craftsmen riding mower
    Any idea of where I can get a drag link for a craftsman riding mower model?
    The part is no longer available from sears and although it was made by Roper I cannot locate it anywhere.


    Thank you
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
    		  
    #2

    Jul 5, 2015, 06:16 AM
    Model and serial numbers would sure help. Often local riding mower dealers can help you find replacement parts.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsmen push lawn mower will start but no restart [ 2 Answers ]

I am lost for words for my lawn mower. I have replaced the spark plug, oil, the cold start push button. I can get it to start and run for about a minute or two at a high idle, then it dies and will not start no matter what I try to get it to start. I tried adjusting the idle but nothing has...

Craftsmen riding mower problems [ 3 Answers ]

Hi, My Craftsmen riding mower won't start in cool weather. It acts like the battery is weak or something is draining the power out of it. Even when I try jumping it a charger or my car. But the funny thing is, It starts just fine when the temperature is above 75 or 80 degrees. Any ideas?

Craftsmen Lawn tracter mower deck won't start? [ 3 Answers ]

Craftsmen 19.5hp 42" cut mower deck about 10 years old. Mower will start fine but when you try to push the lever to engage the mower deck knowthing happens? Put a new mower belt on but still doesn't move the blades. Lawn is getting tall need help! Help!!

Craftsmen lawn mower [ 2 Answers ]

My lawn mower will not start; I changed out the oil... put new spark plug and new gas. Usually I can put a little gas in the carb. And it will start.. but now even that doesn't seem to work. Mind you it tries to start just seems it's not getting enough gas. Question 1: can I flood it by putting...

View more questions Search