Ask Experts Questions for FREE Help !
Ask
    George985's Avatar
    George985 Posts: 4, Reputation: 2
    New Member
     
    #1

    Jun 23, 2015, 01:44 AM
    Time between plastering and painting
    We've hired a contractor for building the exterior side of a wall at our house and the contractor's plan/stages left to do are:


    • Plastering
    • Use marble dust (not sure if the translation is correct)
    • Wait for some period
    • Rub the wall
    • Use primer/Priming
    • Painting


    The question is, how much time should we wait for the best result?
    I've heard some opinions, some say just a few days, someone said wait for a year (to let the wall for 1-2 more months in summer to get dry, then let the winter pass which usually we have only raining and then at the next summer to proceed with the rest stages).
    Would it be okay to let the wall through the winter with raining and wait for the next year?
    What's your opinion?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Jun 23, 2015, 09:36 AM
    Plaster is a cement product and continues to cure for years. When you can paint depends on the temperature and how well the plaster was hydrated. In some cases you have to fog plaster if it is hot and the humidity is low. That being said it is best to wait two days before you prime with a well watered primer.
    George985's Avatar
    George985 Posts: 4, Reputation: 2
    New Member
     
    #3

    Jun 23, 2015, 11:40 AM
    Quote Originally Posted by ballengerb1 View Post
    Plaster is a cement product and continues to cure for years. When you can paint depends on the temperature and how well the plaster was hydrated. In some cases you have to fog plaster if it is hot and the humidity is low. That being said it is best to wait two days before you prime with a well watered primer.
    Ok, thanks a lot for the details.
    Is it okay to wait a few more days just to be sure?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #4

    Jun 24, 2015, 01:14 PM
    Sorry, been gone for a bit. You can wait as long as you like but test the plaster/stucco before priming. Spritz some water on the stucco to see if it sucks right into the material. If the water immediately soaks in then thin your primer quite a bit.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Identify Painting Name and Artist - Oil Painting - Rabbi with shtreimel [ 2 Answers ]

Hi I am looking to identify the Artist's name and Painting name of this Rabbi with a shtreimel (fur rimmed cap) Is is in oil, was framed in the 70's in Winnipeg, MB. Canada. Was told a tale that the Painter was Polish in origin, and went blind, this being his last painting. Photos we...

How do I know what to charge for interior painting and drywall finishing and painting [ 4 Answers ]

I would like to know what to charge per square foot to prime and to finish coat new drywall? I am bidding to paint interior walls and ceilings in a new house. One coat primer and one coat finish. Both coats will be sprayed and backrolled. What is an average rate to charge per foot for each coat?

Painting time for windows with 8 panes over 8 panes (total 16) [ 2 Answers ]

I am doing an estimate for work in a home. I am going to paint a bunch of 8 pane over 8 pane windows. They are in pretty good shape, not much prep work , no putty is needed, a tiny bit of scraping and oil base priming to raw wood wood . I am doing both interior of the windows and exterior of the...


View more questions Search