Ask Experts Questions for FREE Help !
Ask
    damecook's Avatar
    damecook Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 4, 2015, 07:47 PM
    Goodman ac blower delay problem
    The outside ac unit would turn on and the blower would come on 15 -20 seconds later on the air handler. Now they both come on at about same time.
    bitters's Avatar
    bitters Posts: 348, Reputation: 12
    Full Member
    		  
    #2

    Jun 5, 2015, 04:49 AM
    In AC mode I would want the blower to start when outside unit starts. There is no reason for a delay.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Electronic blower time delay relay,/ goodman manufacturing/troubleshooting [ 1 Answers ]

Goodman ARUD blower unit, 7kw heat kit, fuse on the ele. Blower time relay keeps blowing, do I need a new board? Thanks,, wes

Goodman time delay fan relay problems [ 17 Answers ]

Hello, I have a goodman system and it freezes up when blower fan stops working. I have been told told it is the goodman time delay fan switch. Does this sound correct.. How much to fix and is it a diy project.. Thanks in advance.. :)

Goodman blower time delay relay? [ 1 Answers ]

There is a 6 minute delay from when my heat pump compressor comes on until the inside blower comes on. It used to only delay a few seconds. This is a Goodman A60-20 air handler. Do I need to replace the blower time delay relay?

Goodman PHK060-1 Indoor Blower Delay Problem [ 0 Answers ]

I have a Goodman PHK060-1 heat pump. Just recently I have been having a delay after the unit fires up. The outdoor blower starts, and the indoor blower starts anywhere from virtually instantly to five minutes later. Generally speaking, it *seems* like the longer since it has run (and possibly...

Goodman Furnace Blower Problem [ 0 Answers ]

I have a builder installed Goodman GDS80904BHA that is approximately 5 years old. Recently, the furnace seems to be shutting down and "recycling" before the call for heat has ended. Here's what's happening: 1. Call for heat. 2. Draft inducer starts. 3. Ignition glow plug starts. 4. Gas valve...

View more questions Search