Ask Experts Questions for FREE Help !
Ask
    DKoframsey's Avatar
    DKoframsey Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 23, 2015, 10:00 AM
    How can I check my intek 22hp B & S elec. Choke.
    I have a simplicity brodmore 22hp intek. When I start it , it smokes blake and will die unless I engage the blades then it will run fine tillI shut it off , then it will do the same thing.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Apr 24, 2015, 05:39 PM
    Hi,
    Not familiar with an electric choke on this model. They do have an anti-backfire solenoid.
    Can tell you that for ever what reason, you have an overly rich mixture that causes the black smoke. A bit is normal at first cranking. When you engage the deck; you are "loading" the engine which takes more fuel and thereby eliminates the rich condition.
    Peace,
    Clarke
    DKoframsey's Avatar
    DKoframsey Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Apr 27, 2015, 12:56 PM
    Quote Originally Posted by crigby View Post
    Hi,
    Not familiar with an electric choke on this model. They do have an anti-backfire solenoid.
    Can tell you that for ever what reason, you have an overly rich mixture that causes the black smoke. A bit is normal at first cranking. When you engage the deck; you are "loading" the engine which takes more fuel and thereby eliminates the rich condition.
    Peace,
    Clarke
    This has a thermatic solonoid that has a linkage hooked to it. If I don't engage the deck the engine will choke out and die.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I match ohms & amp; watts with a bass amp head and amp; speakers? [ 0 Answers ]

I need to shop for new speaker(s) to use with an amp head that I have and want to know what to look for in specs of watts and ohms so that I don't blow up or fry anything. My head's specs say "120 VAC, 60 Hz, 600 Watts" and under the Biamp (Low/A, High/B) Speaker Output jacks it says "4 Ohm Min....

Can a 150 amp meter panal handel a 100 amp, 40 amp, 30 amp and 30 amp brakers. [ 2 Answers ]

My meter panal is a 150amp panal. I have a 60 amp sub panal coming off it a 30amp to my stove a 30 to dryer and a 40 to the a/c. i want to upgrade the 60 amp sub panal to a 100 amp panal. Will the 150 amp meter panal handel it or do i need to have a 200 amp meter panal installed

B&S 18.5hp OHV Intek must run with choke on- no power [ 2 Answers ]

Craftsman DYT4000 mower with Briggs & Stratton 18.5hp OHV Intek engine started putting out some black smoke when starting last week. Today it started fine, put out a puff of black smoke, and seemed to run fine until I started to mow. It died as though it was fuel starved. Restarts easily but will...

22hp v-twin B&S won't start [ 2 Answers ]

My v-twin 22 hp B&S mower won't start. If I put gas in carb it will run till that gas burns up. I am not getting any fuel in fuel filter. The mower is a poulan. I was woundering what could be the problem is there a fuel pump on this mower ? Thanks

View more questions Search