Ask Experts Questions for FREE Help !
Ask
    Ollies Mom's Avatar
    Ollies Mom Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 28, 2015, 03:18 PM
    Is a total cast iron soil stack replacment necessary?
    To get ready to have our only bathroom totally remodeled,we decided to have a toilet installed in our basement. The plumber determined that the cast iron soil stack in the basement is corroded and should be replaced. Using pvc to do the repair, the plumber is recommending a total replacement through the entire house. This would include basement, 1st floor, 2nd floor and attic. Does the entire length need to be replaced?
    joypulv's Avatar
    joypulv Posts: 21,591, Reputation: 2941
    current pert
    		  
    #2

    Feb 28, 2015, 04:23 PM
    It needs to be replaced if a lot of it is corroded. That can't be determined easily, so it's not unusual for a plumber to suggest replacing all of it. To replace iron at the bottom with PVC requires strong support according to codes, even if there are supports in the walls. When a bottom section is cut out, even dropping half an inch could be a problem.

    So I would replace it all. You are renovating the first floor anyway, and I assume the attic is open and accessible, so the question is how hard it is to access the iron in the second floor wall without opening a section of drywall.

    I had a house built in 1912 and the kitchen stack was so corroded it was weeping, and so thin you could tap it with a hammer and punch holes in it.
    But you don't have to. Ask for a quote both ways.
    catonsville's Avatar
    catonsville Posts: 894, Reputation: 91
    Senior Member
    		  
    #3

    Feb 28, 2015, 05:07 PM
    Quote Originally Posted by joypulv View Post
    It needs to be replaced if a lot of it is corroded. That can't be determined easily, so it's not unusual for a plumber to suggest replacing all of it. To replace iron at the bottom with PVC requires strong support according to codes, even if there are supports in the walls. When a bottom section is cut out, even dropping half an inch could be a problem.

    So I would replace it all. You are renovating the first floor anyway, and I assume the attic is open and accessible, so the question is how hard it is to access the iron in the second floor wall without opening a section of drywall.

    I had a house built in 1912 and the kitchen stack was so corroded it was weeping, and so thin you could tap it with a hammer and punch holes in it.
    But you don't have to. Ask for a quote both ways.
    How old are you Joy?? LOL
    joypulv's Avatar
    joypulv Posts: 21,591, Reputation: 2941
    current pert
    		  
    #4

    Feb 28, 2015, 06:33 PM
    older than dirt
    catonsville's Avatar
    catonsville Posts: 894, Reputation: 91
    Senior Member
    		  
    #5

    Feb 28, 2015, 08:21 PM
    Quote Originally Posted by joypulv View Post
    older than dirt
    Joy, did you miss my point? You said, "I had a house built in 1912"... It struck my funny bone.
    joypulv's Avatar
    joypulv Posts: 21,591, Reputation: 2941
    current pert
    		  
    #6

    Mar 1, 2015, 06:34 AM
    OH! Yep a real knee slapper. It was almost my bedtime.
    That's what I get for abbreviating.
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #7

    Mar 2, 2015, 09:51 AM
    Replacing Cast Iron Soil Stack is a big job. It requires lots of cutting of walls, floors and perhaps even ceilings. Call another plumber to get second opinion before you commit yourself to this project.


    Milo
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Add sink drain to soil stack. Can I remove a cast iron reducer? [ 0 Answers ]

I need to add a sink drain to a 3" soil stack. I don't have room to add a wye above the 3" to 4" cast iron reducer (B). Can I eliminate the cast iron reducer (B) and and use a shorter fitting to take the 3" ABS directly into the 4" cast cleanout (C)? What kind of problems might I encounter removing...

Can-you-replace-4-inch-cast-iron-soil-stack-3-i [ 1 Answers ]

Can you just replace a small section with PVC? I down want to go all the way up through the roof.

Can you replace a 4 inch cast iron soil stack with 3 inch pvc? [ 3 Answers ]

I recently purchased a home built (I'm guessing) in the early 1900's. I noticed a leak in my basement coming from the old 4 inch cast iron soil stack running from my second floor bathroom to the basement. There is water dripping down the pipe to the basement. Three plumbers have come out to...

Crack in Cast Iron Main soil stack [ 3 Answers ]

:confused: I just moved into a Bi-level house approx. 40-50 years old. It has a Cast Iron Main soil stack (main vertical sewer line). On the lower level I noticed that it has a crack that is approx 5"-6" long about 1/4" thick. Now I bought a new pluming book because of some other repairs I had...

Cast iron soil stack to pvc [ 15 Answers ]

the plumbing in our house is from 1936. We noticed a large stain in the ceiling, tore it out to reveal the cast iron soil stack (runs from the upstairs bathroom turns a corner then runs straight to the basement) and found the leak was around (very bad leak) the lead joint. My husband finally got...

View more questions Search