Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Is a total cast iron soil stack replacment necessary? (https://www.askmehelpdesk.com/showthread.php?t=808838)

  • Feb 28, 2015, 03:18 PM
    Ollies Mom
    Is a total cast iron soil stack replacment necessary?
    To get ready to have our only bathroom totally remodeled,we decided to have a toilet installed in our basement. The plumber determined that the cast iron soil stack in the basement is corroded and should be replaced. Using pvc to do the repair, the plumber is recommending a total replacement through the entire house. This would include basement, 1st floor, 2nd floor and attic. Does the entire length need to be replaced?
  • Feb 28, 2015, 04:23 PM
    joypulv
    It needs to be replaced if a lot of it is corroded. That can't be determined easily, so it's not unusual for a plumber to suggest replacing all of it. To replace iron at the bottom with PVC requires strong support according to codes, even if there are supports in the walls. When a bottom section is cut out, even dropping half an inch could be a problem.

    So I would replace it all. You are renovating the first floor anyway, and I assume the attic is open and accessible, so the question is how hard it is to access the iron in the second floor wall without opening a section of drywall.

    I had a house built in 1912 and the kitchen stack was so corroded it was weeping, and so thin you could tap it with a hammer and punch holes in it.
    But you don't have to. Ask for a quote both ways.
  • Feb 28, 2015, 05:07 PM
    catonsville
    Quote:

    Originally Posted by joypulv View Post
    It needs to be replaced if a lot of it is corroded. That can't be determined easily, so it's not unusual for a plumber to suggest replacing all of it. To replace iron at the bottom with PVC requires strong support according to codes, even if there are supports in the walls. When a bottom section is cut out, even dropping half an inch could be a problem.

    So I would replace it all. You are renovating the first floor anyway, and I assume the attic is open and accessible, so the question is how hard it is to access the iron in the second floor wall without opening a section of drywall.

    I had a house built in 1912 and the kitchen stack was so corroded it was weeping, and so thin you could tap it with a hammer and punch holes in it.
    But you don't have to. Ask for a quote both ways.

    How old are you Joy?? LOL
  • Feb 28, 2015, 06:33 PM
    joypulv
    older than dirt
  • Feb 28, 2015, 08:21 PM
    catonsville
    Quote:

    Originally Posted by joypulv View Post
    older than dirt

    Joy, did you miss my point? You said, "I had a house built in 1912"... It struck my funny bone.
  • Mar 1, 2015, 06:34 AM
    joypulv
    OH! Yep a real knee slapper. It was almost my bedtime.
    That's what I get for abbreviating.
  • Mar 2, 2015, 09:51 AM
    Milo Dolezal
    Replacing Cast Iron Soil Stack is a big job. It requires lots of cutting of walls, floors and perhaps even ceilings. Call another plumber to get second opinion before you commit yourself to this project.


    Milo

  • All times are GMT -7. The time now is 03:24 AM.