Ask Experts Questions for FREE Help !
Ask
    timlightak's Avatar
    timlightak Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 15, 2007, 08:39 PM
    I'm trying to remove the price pfistevalve stem in the shower and I can't . Single
    I'm trying to remove the old price pfister stem in the shower and I can't... single price pfister stem valve. Not sure the model or part number, just know the house is old, and the plumbing is probably old. I cannot figure out how to remove the cartridge to replace it.
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #2

    Apr 15, 2007, 08:48 PM
    First you turn off the water. Then you remove the handle after the handle is off you can see a sleeve that will slip forward and after that it is pretty straight forward about getting it apart.
    adrew501's Avatar
    adrew501 Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Jul 1, 2011, 10:32 AM
    My price pfister single handle shower will not adjust between hot and cold water, it stays on hot. Is my stem or valve worn and need replacing?
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #4

    Jul 1, 2011, 05:21 PM

    Hello Adrew,

    Pleas start your own thread the above thread is four years old, to start a new post it will have more visibilty and the experts will respond to you, to answer your post it sounds like you have problem with your cartridge, remove and replcae it with a new one, Thanks.

    John
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Shower stem stuck [ 5 Answers ]

Hi - I am trying to replace washer on the bottom of a stem because shower leaks. It's not hot or cold, but on/off handle in the middle. Anyway, I bought the tool to get the packing nut off, but now I can't budge the stem. Is there a trick to it? Maybe I don't have enough strength in my hands. ...

Shower diverter stem removal [ 8 Answers ]

I have an unknown brand shower diverter. It's a knob that sits between the hot and cold knob. All three have a knurled end and the stem appears to be made of brass. The stem on the diverter has been "loose" for some type and squeaks when you turn it. Recently, more water now comes from the spigot...

Shower stem [ 1 Answers ]

How can I remove a hard to get out shower stem

Single price pfister stem valve [ 2 Answers ]

I have a Single turn knob for my shower made By Price Pfister. The valve needs replacing. Removing the knob and un-screwing the metal Circular cylinder, I’m left with the stem valve. From the front, It is circular with two tabs, one On top and bottom. With a screw driver from the Back tabs,...

Tub/shower valve stem [ 7 Answers ]

Hello,I will like to know can a tub valve stem get restricted with sediment and block Water flow till you get hardly nothing or just a stream?It has been leaking for Quite a while now and has gotten worser.I already have an existing sediment Build up from galvanized pipes.I been tapping the...

View more questions Search