Ask Experts Questions for FREE Help !
Ask
    Leonard12's Avatar
    Leonard12 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 29, 2007, 04:44 PM
    Single price pfister stem valve
    I have a Single turn knob for my shower made
    By Price Pfister. The valve needs replacing.
    Removing the knob and un-screwing the metal
    Circular cylinder, I’m left with the stem valve.
    From the front, It is circular with two tabs, one
    On top and bottom. With a screw driver from the
    Back tabs, and pulling on the handle, it will move
    But will not pull out. How do I pull it out?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Jan 29, 2007, 05:03 PM
    Sorry Leanord,

    We can't do much without a model number. Regards, Tom
    Leonard12's Avatar
    Leonard12 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Jan 30, 2007, 12:54 PM
    Will have to look for the mod# but the valve or cartridge that pulls
    On and pushes off is made of plastic.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Old Price Pfister parts [ 3 Answers ]

I have an old bathroom shower/tub faucet that needs some parts. How do I identify the parts. I have pictures. I need the cartridge and handle. Doe anyone know of a website or place that specializes in older model parts? This faucet is at least 30 years old - Price Pfister. Thanks Greg

Price Pfister shower [ 2 Answers ]

I purchased a price pfister shower kit and it did not have an installation manual. They are closed today and their website does not have manuals on it. I just need to know how to install the valve. Can some one direct me to a site that will give me that info?

Tub/ shower leaking. Price Pfister valve question. [ 4 Answers ]

Hi! We have an old Price Pfister Tub and shower faucet. It has been dripping for some time now and I would like to replace the whole thing with something newer anyway. If at all possible I would like to do it myself. I have been doing some research and have found that the new OX8 valves have a...

Price pfister [ 2 Answers ]

Recently installed 1 knob shower faucet made by price pister . Problem here is the tub spout has plenty of flow but when you pull the knob for the shower the pressure isn't that strong . Any ideas on how to get more pressure from shower. Thanks for any info, Ryan p.s. I used 1/2 copper

View more questions Search