Ask Experts Questions for FREE Help !
Ask
    tabaseball's Avatar
    tabaseball Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 8, 2015, 10:48 AM
    Just replaced a new mixer valve off furnace and now there is low hot water pressure?
    Just replaced a new mixer valve off furnace and now there is low hot water pressure to the bathroom. There is also a hot water tank attached to the system. Any ideas?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Feb 8, 2015, 08:27 PM
    Furnace or boiler?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #3

    Feb 9, 2015, 02:56 PM
    Check the shutoff valves you closed... close and reopen fully and see if that improves things. How is the cold water pressure in this bathroom?

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Mixer shower low hot water pressure [ 1 Answers ]

Hi am not to sure if am posting on the right thread but ill cut the story short I have a mixer shower and the hot water pressure is low I have spoke to a few people and they say get a water pump

Very low hot water pressure, moen 1 handle shower valve [ 13 Answers ]

I have a moen 1 handel shower valve. When I turn it on I have good cold pressure but hardly any hot pressure. I removed handle and turned stem all the way to hot but still I have low pressure. I tried to adjust scald guard but that is not the problem is there any other adjustment?

Why am I getting low hot water pressure in my shower mixer? [ 1 Answers ]

I just installed a single contol tub and shower set by price pfister and when I Turn the water on I am getting cold water and warm water and no hot water what did I do wrong

Low hot water pressure in replaced faucet [ 3 Answers ]

I replaced the faucet in a first floor bathroom, cold water is fine but hot water flow was almost non existent. I checked and cleaned the screen in the tap which did increase the flow to a trickle but still nothing like an acceptable flow. I checked the hot water supply pipe and that is fine (I...

View more questions Search