Ask Experts Questions for FREE Help !
Ask
    matty77's Avatar
    matty77 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 21, 2015, 08:47 AM
    Thermostat set to 60 temp is 75
    2 zone heating system. Shut off thermostat still reading 75
    joypulv's Avatar
    joypulv Posts: 21,591, Reputation: 2941
    current pert
    		  
    #2

    Jan 21, 2015, 09:17 AM
    You need to provide a lot more information than that. Please don't make people play 20 questions.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Jan 21, 2015, 10:20 AM
    Check the battery. Some default "on", others default to 50* when battery is low.. Can you hear the heater running past the set point?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #4

    Jan 21, 2015, 03:20 PM
    Is this a hot water or warm air system?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Why would my a/c unit not shut off on the set temp of the thermostat? [ 1 Answers ]

My hvac thermostat is set at 75F, BUT MY ROOM TEMP READS 73F, yet my air handler and condenser continues to run. When I set the temp at 77F then the unit shuts off. Why might this happen?

How to set digital thermostat cal temp [ 1 Answers ]

How do I set the cal temp and swing temp?

Burner comes on and goes off before reaching temp, set on the thermostat [ 1 Answers ]

My furnace model# is concord 90 High eff c2e24b-24, The thermostat call for heat the burner comes on for 15 sec and goes off. This happens 6 or 7 times and it shuts off. What should it do to correct it

Thermostat does not stop on set temp. [ 5 Answers ]

Hello, I Was Wondering If Anyone Can Help Me With This: I Changed The Location Of The Thermostat From One Side Of The Closet To The Other. I Did Not Moved The Cables As They Were Still In Range. I Also Made Sure To Keep The Same Color Of Wire With The Same Input. When I Turn It Back On The Screen...

Furnace not kicking on when temp drops below thermostat set temp [ 1 Answers ]

I've got a Beckett oil heat water on demand furnace that heats through baseboards. Since this past weekend the furnace hasn't been kicking on when the temperature drops below my set temp of 68 degrees. I have to go down to the furnace and simply touch the top of the reset box for it to kick on. ...

View more questions Search