Ask Experts Questions for FREE Help !
Ask
    COLOSSUS0477's Avatar
    COLOSSUS0477 Posts: 6, Reputation: 1
    New Member
    		  
    #1

    Nov 29, 2007, 12:13 AM
    Thermostat does not stop on set temp.
    Hello, I Was Wondering If Anyone Can Help Me With This: I Changed The Location Of The Thermostat From One Side Of The Closet To The Other. I Did Not Moved The Cables As They Were Still In Range. I Also Made Sure To Keep The Same Color Of Wire With The Same Input. When I Turn It Back On The Screen Turns On And It Measures The Temperature, But It Does Not Stops On The Set Temperature. The Model Is Simple Comfort Thermostat 2000. Can U Please Help Me Fix This?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Dec 1, 2007, 07:49 AM
    Is this your thermostat?
    http://www.fhp-mfg.com/newpdfs/ICM_Tstat.pdf
    COLOSSUS0477's Avatar
    COLOSSUS0477 Posts: 6, Reputation: 1
    New Member
    		  
    #3

    Dec 10, 2007, 05:05 AM
    Yes.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #4

    Dec 10, 2007, 05:09 AM
    So where does the temp stop if not at the set temp?
    COLOSSUS0477's Avatar
    COLOSSUS0477 Posts: 6, Reputation: 1
    New Member
    		  
    #5

    Dec 10, 2007, 05:24 AM
    It does not stop. It continues to run bellow my set temp. that's the issue I need it to stop. The AC does not stop running.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #6

    Dec 10, 2007, 05:37 AM
    Sounds like there may be a short in the wiring or at the teminals that is bypassing the stat.

    Try disconnecting all the wiring and see if that stops the unit from running.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Maple Chase thermostat does not show temp [ 1 Answers ]

I was using a steamer to strip wallpaper too close to the thermostat & now my thermostat only shows the time of 12:19. No temp, can't use any of the buttons to set anything. I tried the reset button in the back & replaced the 9V battery. Now what? New thermostat?

Rite Temp digitial thermostat [ 1 Answers ]

Why does my digital display show the word 'filter". I just changed the filter about 2 weeks ago.

Dishwasher makes thermostat temp go up [ 5 Answers ]

Whenever I run the dishwasher, the temperature on the thermostat located on the opposite wall goes higher, even though the actual house temperature doesn't. This causes it to run for a lot longer, making the house colder than it normally would get. The wall feels the same as always (not hotter from...

Oil furnace kick in and stop when water temp is high [ 2 Answers ]

Good afternoon, My house is heated with an oil furnace providing heat to a hot water baseboard system. For the last little while, I noticed the burner kicking-in for a few second when the thermostat send the signal (close the circuit) and stop with a second or two. When it does that the water...

View more questions Search