Ask Experts Questions for FREE Help !
Ask
    rsisney's Avatar
    rsisney Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 7, 2015, 10:05 AM
    E2eh-015ha furnace works then doesn't
    My electric furnace works fine for a while then it stops working. The only way to get it to work is to turn breaker off and back on, but the breaker isn't tripped.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Jan 7, 2015, 11:01 AM
    With no more information than you have provided, I would say check the electrical connection of the wire(s) to the breaker.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Jan 7, 2015, 03:30 PM
    Could be your sequencer.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace works but thermostat doesn't [ 1 Answers ]

Weil-McLain boiler. The thermostat has no control over the boiler. It gets up to temp setting and will not shut off. Old style Honeywell mercury thermostat. Any suggestions?

Why would my e2eh 015ha intertherm furnace blower will not come on when set to auto h [ 1 Answers ]

Blower will not come on when set on auto. Unit heats up and shuts right back off but blower never come on unless it is set to on position but there is no heat when ran in on position. What could be the problem?

Nordyne elec.furnace parts model e2eh-012ha [ 2 Answers ]

I have a Nordyne electric furnace model E2eh-012ha It has a c with I need a control panel with external manual heat to cool switch and a fan switch with auto and on, attached to control panel. Need to find panel and price. Furnace ser. # e2e9707-07093 It is in a moble home

Nordyne Electric Furnace model# e2eh-015ha will not heat? [ 0 Answers ]

My blower runs continusly but will not heat. Only blows cool air even if thermastate is set on heat.

FAN doesn't work when it's 'Auto', but works fine at 'On' in my central air/furnace [ 1 Answers ]

undefinedFAN 'On' or 'Auto'FAN 'On' or 'Auto' Hi, I have programmable thermostat connecting air condition / furnace system. Now if I turn system to 'Cool' and Fan at 'Auto', no cool air come out (compressor works, you can hear the noise). If I set FAN to 'On', life is getting better. But the FAN...

View more questions Search