Ask Experts Questions for FREE Help !
Ask
    jbdboggs's Avatar
    jbdboggs Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 1, 2015, 03:25 AM
    Coleman furnace problems
    Coleman model DGATO7OBDE furnace everything works but does not get hot like it should. No codes good burner but can touch chamber while running and only gets to 66 degrees in trailer
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #2

    Jan 1, 2015, 04:35 AM
    Hi jb and welcome, How long does the burner stay on? Do you have good air movements from the vents?
    jbdboggs's Avatar
    jbdboggs Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Jan 1, 2015, 01:25 PM
    Stays on, nice blue flame. Good air from vents just never gets really hot
    bitters's Avatar
    bitters Posts: 348, Reputation: 12
    Full Member
    		  
    #4

    Jan 1, 2015, 02:17 PM
    How many burners? Just one?
    jbdboggs's Avatar
    jbdboggs Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Jan 1, 2015, 03:15 PM
    Yes it's a mobile home... Works perfect just not hot enough

    Just won't get hot in Mobile
    bitters's Avatar
    bitters Posts: 348, Reputation: 12
    Full Member
    		  
    #6

    Jan 1, 2015, 04:38 PM
    Make sure the fan is running on medium or low. If this is a heat only furnace it might have a single speed fan.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troubleshoot Coleman Evcon Furnace blower problems [ 1 Answers ]

Intermittent blower problems sometimes it will work normally when called for and then it will not cycle. Naturally then the furnace gets hot and kicks off.

Coleman furnace problems [ 0 Answers ]

Model 7656-856 furnace is not able to turn the blower fan on. It will come on only if the entire furnace is cool to the touch, or when it is not, if you use something to manually rotate the fan or if you hit the side of the casing around the fan. Would this be caused by the fan itself or something...

Coleman evcon furnace problems [ 1 Answers ]

When switch comes out of set position, the pilot light goes out.

Coleman evcon furnace problems? [ 1 Answers ]

Coleman Evcon Furnace DGAT090BDD Furnace kicks on blower stays on when you check there is no heat coming through the vents. Look at the furnace and the green indicator light is blinking 4 times. Have woke up every day this week with the tempature in my house 58 degrees. What is wrong??

Coleman evcon furnace problems [ 1 Answers ]

The diagnostic light blinks twice on Coleman Evcon #DGAHO56BBSA 5600BTU natural gas forced air out bottom Mobile home heater. 2 blinks is supposed to be "combustion air switch stuck closed" which is called a pressure switch in the part manual. When I restart the furnace cylce and place suction on...

View more questions Search