Ask Experts Questions for FREE Help !
Ask
    rickcrouch's Avatar
    rickcrouch Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 28, 2014, 08:16 AM
    Honeywell Programmable Thermostat
    Changed out my thermostat now fan doesn't kick on nor does it come on manually
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Dec 28, 2014, 11:17 AM
    You must have wired it improperly.
    rick crouch's Avatar
    rick crouch Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Dec 28, 2014, 06:30 PM
    No, I've checked and double checked. I even clipped the wires back to insure good contact
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #4

    Dec 28, 2014, 06:49 PM
    Did you go through the configuration process for your stat?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #5

    Dec 28, 2014, 07:56 PM
    I'd like to start with some basics. What stat did you buy, what stat did you remove and what type of furnace or boiler do you have?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honeywell Programmable Thermostat [ 2 Answers ]

Should My Thermostats Panel Operate On The 2 Aa Backup Batteries Or Be Hardwired To Common And Have Batteries As Backup When Power Is Out? Panel Lights Up With Batteries In, Does Not Without Batteries. Don't Know Where Common Wire Originates From. Can I Splice Into One Of The Other Wires, G, Y,...

Honeywell programmable thermostat [ 10 Answers ]

Thermostat will not shut down furnace when switched to "off" position, but will shut down when set temperature is met.

How do you bypass a honeywell basic programmable thermostat to run a/c until bad thermostat is replaced [ 2 Answers ]

Just a quick question.

Honeywell Programmable Thermostat [ 2 Answers ]

I just changed the batteries on my Honeywell Chronotherm IV Plus, programmable thermostat and the temperature shown for the room is extremely high (104 degrees now) when the room is about 67 degrees. How do I fix?

Honeywell programmable thermostat [ 1 Answers ]

My thermostat's display is showing - AC and the heat will not come on, I removed it and replaced the batteries to no avail? What can I do to get the heat to work again? It is 40 degree's here

View more questions Search