Ask Experts Questions for FREE Help !
Ask
    ricklucy's Avatar
    ricklucy Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Dec 16, 2014, 07:49 AM
    Shower spigot
    Just had the tile re-done in a shower - tile guy conveniently broke the screw that the shower spigot goes into-- the screw broke and it doesn't appear to be rusted
    The metals clean where the break occurred. 1. how can this happen.
    2. about how much of a repair is this. 3. has anyone seen this before?
    Any help would be nice - Thanks
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Dec 16, 2014, 08:03 AM
    Tell us what you mean by "spigot". Do you mean the shower head, the tub spout (assuming that this is a tub and shower) or the valve where you turn the water on and off. If possible show picture.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    Dec 16, 2014, 06:21 PM
    Tile guys problem, tell him to fix what he did or he should call a plumber. Do not pay him until it is fixed correctly
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My water runs hot out of the spigot but is cold coming out of the shower [ 0 Answers ]

When I use my shower the water coming out of the spigot (or faucet) is scalding hot (as set by the temp control knob) but when I engage the shower the water coming out is only luke warm... what would cause this?! I have a modular home on a finished basement that was built in 1990... any thoughts?

Outside spigot [ 4 Answers ]

I have an outdoor spigot that that water comes out of the handle when it is turned on. How do I properly pack it?

Black stuff coming out of tub spigot and shower head [ 5 Answers ]

First noticed the black flecks in the tub when running a bath for a child. It did not happen every time. Thought the shower was okay, but ran the shower into a bucket and it too has the black flecks. What is it and what can be done to get rid of it. These pipes are not galvanized, this place is...

Outside Spigot [ 4 Answers ]

I have three outside spigots I want to replace. How do I tell if they are screwed on or soldered (sp) on? With it flush to the brick I can't see and I don't want to twist it off. The pipe is copper so I'm guessing soldered. It is not a no freeze spigot. How do I replace them with a screw on...

Outside spigot [ 1 Answers ]

We have two outside spigots, one on either side of the house. The water is turned on and one works and one does not. The knob turns but no water comes out. What could be the problem?

View more questions Search