Ask Experts Questions for FREE Help !
Ask
    Deborah Gorman's Avatar
    Deborah Gorman Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 8, 2014, 03:44 PM
    My bryant needs id motor
    I have a bryant 310AAV042090 was installed in 2006. My id motor stopped working today. I called the company that installed the unit. They want to charge me $1000.00 to order this part and install it. Being that it is 21 degrees outside I feel I am being taken advantage of. The part number is mc21ze1222a. I think I could do this myself or order the part and have some help. Is this difficult to do? How much is this part? Thank you
    bitters's Avatar
    bitters Posts: 348, Reputation: 12
    Full Member
    		  
    #2

    Dec 8, 2014, 03:48 PM
    Do not pay $1K for that repair... crazy. Let me get back to you.
    bitters's Avatar
    bitters Posts: 348, Reputation: 12
    Full Member
    		  
    #3

    Dec 8, 2014, 04:01 PM
    OK, That furnace uses a PSC motor, not the super expensive ECM motor. It's not real difficult to change it out. You will need help putting it back in, kind of tricky.

    I don't come up with anything with that part number. Are there any other numbers on the motor?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #4

    Dec 8, 2014, 07:20 PM
    Check the brand of the inducer motor. Fasco makes many of them. They are listed on eBay and other sites too. eBay -"Bryant inducer motor" $45 up to $350.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant Plus t80 blower motor [ 0 Answers ]

Bryant Plus 80t, 12 yrs old. Blower stopped working though furnace ignited. Guy came out, said limit switch tripped, reset switch, said he did something to make it less likely to fail again (according to the invoice he adjusted the gas pressure and blower off delay). I also paid for some routine...

Bryant 340MAV Blower Motor [ 0 Answers ]

I have a Bryant 340MAV that the blower motor when bad in. I had a technician come out and replace the motor. The new motor does not seem to blow as hard. The first tech I talked to on the phone said that the OEM motor is a 3 speed motor. I am not sure but I think the replacement motor is a single...

Code 44 for a Bryant blower motor [ 0 Answers ]

How do I reset code 44?

Need replacement motor for Bryant FK4C A.C. [ 1 Answers ]

Hi All, Pardon any ignorance that may come through in my question, but I'm trying to assist my husband in finding a motor to replace the one that broke in our Bryant A.C. Unit. The Model No. is 29-FKYCNBOD6-86BTW. It is a 3/4 H.P.; RPM 0-1400; 1065. Is that enough info to get started? ...

Bryant Blower Motor [ 3 Answers ]

I have a Bryant furnace that is 13 yrs. Old. I would like to take the blower motor out and replace it with a new model. Is there a correct way to remove the blower without tearing the whole furnace apart?

View more questions Search