Ask Experts Questions for FREE Help !
Ask
    Loriislead's Avatar
    Loriislead Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 17, 2012, 03:35 PM
    Code 44 for a Bryant blower motor
    How do I reset code 44?

Check out some similar questions!

Bryant 90 Plus gas furnace blower motor [ 5 Answers ]

I have a Bryant 90 Plus (350MAV) and have a problem. I noticed that the heater was not turning on. I opened the furnace door and found the diagnostic led flashing 1-3. Upon checking the meaning of the code, I found it referenced a dirty filter of defective blower. I shut the furnace off at the...

No blower motor,code 33 bryant 80plus [ 3 Answers ]

I have a bryant 80plus. The blower does not come on when switched on at the thermostat. The glow ingitor was in pieces when this started. Now I get code 33.

Blower motor won't shut off on bryant [ 5 Answers ]

Have a bryant furnace 20+ yrs old blower motor won't shut off even after desired temp. is achieved. New thermostat.

Bryant Furnace Blower Motor Issue [ 4 Answers ]

Hello - I have a Bryant Mid Range Efficiency Furnace (395cav036055). The blower motor seems to be putting out too little air volume in heating mode. While the limit switch has not turned off the burners yet, it may just be a matter of time. (I do not smell any type of electrical type of burning...

Bryant Blower Motor [ 3 Answers ]

I have a Bryant furnace that is 13 yrs. Old. I would like to take the blower motor out and replace it with a new model. Is there a correct way to remove the blower without tearing the whole furnace apart?

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.