Ask Experts Questions for FREE Help !
Ask
    twins59's Avatar
    twins59 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 7, 2014, 09:24 AM
    I am putting in 6 reset lights do I use a two way switch or a three way switch
    I am putting in 6 reset lights do I need a two way or three way switchs
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Dec 7, 2014, 09:32 AM
    First off, there is no such thing as a two-way switch. There are single-pole, 3-way and 4-way switches. Also double-pole but there is not a typical switch used in home wiring.

    What switch you use depends on how you are wiring it. What is your level of wiring expertise?
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #3

    Dec 7, 2014, 09:51 AM
    Lets start with something easy to help us.

    Will there be one switch to control the lights or more then one switch?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How can I wire 2 lights controlled by a single switch with the power to the switch? [ 4 Answers ]

Need a wiring diagram showing how to wire 2 lights controlled by a single switch where the power comes in to the switch box.

2 porch lights, operated by a 3 way switch, 1 switch and 1light upstairs and 1 down [ 2 Answers ]

I have an upstairs porch light, and a downstairs porch light. I want to turn both lights on/off from a switch upstairs and both lights on/off from a switch downstairs. Do I use 3 way switches? My power is from the downstairs switch. Thanks, Jesse Siglow

I replaced pull switch lights with recess but the wall switch won't turn off the light [ 2 Answers ]

I added lights and outlets to my basement and all of the outlets work fine. Before I started the switch on the wall controlled one light and all of the others had pull strings. I've tried everything but the switch will not turn off the remaining three lights. What did I do wrong... how do I fix it?...

Separate Fan light switch, fan switch and switch for can lights to one location [ 2 Answers ]

I have A circuit that has 6 can lights and a fan light. The power is at the switch box I need to know how to wire the separate switches for the cans,and the light on the fan, and fan (That would be in a three gang switch box.) to one location.

Converting pull switch lights to wall switch [ 3 Answers ]

I've been struggling finding the answer to this in books and online, it seems as if it should be an easy question and something that gets done all the time. Looking for some help. My basement has several rooms and all lights are wired "hot" with pull switches from each light receptacle. When the...

View more questions Search