Ask Experts Questions for FREE Help !
Ask
    benoitsk218's Avatar
    benoitsk218 Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 6, 2014, 11:50 AM
    How to set the timing on a 25 hp nissan 2 stroke
    I broke one linkages changed it now it back fires threw the carb so hard it blows the fuel line off the fly wheel has timing marks you put it in the water and it bogs down and dies under a load
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Dec 6, 2014, 04:12 PM
    Put the engine in forward gear, in order to get WOT. Then, the bracket should hit the WOT stop bolt and you can check max timing. Also, you could compare the length of the new linkage to the old linkage and adjust, as necessary. That should set the timing pretty close. While you are at it, I would replace the spark plugs; examine the exhaust port for carbon build-up; and start using Amsoil Synthetic Outboard 2-Cycle Engine Oil, mixed 100:1. Too high of an oil/fuel ratio can cause big problems on 2-cycle engines and contribute to water pollution.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I set my timing with a timing light on a 95 Accord? [ 2 Answers ]

How do I set the timing with a timing lite on a 95 accord

Timing belt 2006 nissan altima? [ 2 Answers ]

I have a 2006 altima and when I try to start it up it takes like 3 to 5 minutes before it cranks,I were told it could be the fuel pump or the fule sensior and then I were told today it could be the timming chain so what can I do to resolved this issue?

Nissan Altima Timing Belts [ 5 Answers ]

Does the 2001 Nissan Altima have a timing belt or a timing chain and what is the required maintenance for it?

1986 nissan Micra broken timing belt [ 1 Answers ]

My 1986 Micra 120,000 km has a broken timing belt. My mechanic told me it will about $200 to replace this, however, he won't know if the valves would be damaged until he opens up. My question is would the valves be damaged and if so how much would that cost approx. if any idea. Also, prior to this...


View more questions Search