Ask Experts Questions for FREE Help !
Ask
    rcasper's Avatar
    rcasper Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 2, 2014, 10:14 AM
    Blower stays on too long. (C.A.Olsen model SH 125)
    Blower stays on too long. Blows cold air. Knucle rap to furnace wall turns off blower. What's wrong? Where can I get a schematic and/or parts list?
    bitters's Avatar
    bitters Posts: 348, Reputation: 12
    Full Member
    		  
    #2

    Dec 2, 2014, 12:28 PM
    With the C.A. Olsen name on it, this is a really old furnace. Sounds like the fan relay or the Honeywell limit switch is bad.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Olsen DuaMatic HTL-100B Oil Furnace Blower Motor Replacement. [ 0 Answers ]

I can't seem to find a replacement for this motor. GE Model 7J402AS1, 120vac, 1/3hp, 1725rpm, 6.4amps. Thank you

Blower motor stays on long after the flame shuts off [ 2 Answers ]

Furnace Blower stays on too long. [ 1 Answers ]

Hello. I have a Honeywell Electric furnace. Model # AR36-1 The blower stays on too long after furnace shuts off and cold air blows out. Any ideas how to fix it? Thanks.

Furnace Blower stays on far too long [ 1 Answers ]

We have an older Tappan ANS Z21.47 furnace, circa 1979. When the cooler weather season started this year we turned on the heat and noticed that once the house had reached the correct temperature then the blower would remain on and blow cooler air for at least 20 minutes afterwards. We had read...

Furnace fan blower stays on too long. [ 1 Answers ]

The fan blower for a coleman mobile home furnace stays on and begins to blow cold air before shutting off, how do I know if the fan/lower limit switches are the right ones? Model # 7680C856 80,000 BTU.

View more questions Search