Ask Experts Questions for FREE Help !
Ask
    Aaron Helms's Avatar
    Aaron Helms Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Nov 17, 2014, 12:38 PM
    Dearborn gas heater unit model DVF-65B-N
    I have a 2 stage blower motor, needs replace/repaired. Any idea on who/where can replace/rebuild, west coast?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Nov 17, 2014, 01:28 PM
    The motor should have a manufacturer and model #. Could be any brand, GE, Emerson, Dayton etc. Any good electrical supply shop should be able to help. "West Coast" means San Diego to Seattle, might want to narrow the area down for more help.
    Aaron Helms's Avatar
    Aaron Helms Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Nov 17, 2014, 01:31 PM
    The collar that hold the fan shroud on, the set screw is stripped and no way to remove, otherwise I could rebuild myself
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #4

    Nov 17, 2014, 06:05 PM
    You can't pull the entire fan and case out of the heater? Usually just 4 screws. Then use an easyout , retap with a bigger screw and reinstall. Maybe I'm not quite understanding but I have done this many times.
    Aaron Helms's Avatar
    Aaron Helms Posts: 4, Reputation: 1
    New Member
    		  
    #5

    Nov 17, 2014, 06:38 PM
    I would send you a picture of what I'm dealing with but I don't have an email address.. .
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #6

    Nov 18, 2014, 08:06 AM
    Quote Originally Posted by Aaron Helms View Post
    I would send you a picture of what I'm dealing with but I don't have an email address.. .
    Just post the picture here. Click "go advanced" and "manage attachments"
    Aaron Helms's Avatar
    Aaron Helms Posts: 4, Reputation: 1
    New Member
    		  
    #7

    Nov 22, 2014, 06:49 PM
    Grainger is able to get what I need if I can get the motor out...
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #8

    Nov 22, 2014, 07:26 PM
    Unless you have some special arrangement, open the air handler front. I an upflow heater, the motor and cage is mounted inside the fan case. Look at the top of the fan case. Can you see 4 hex head screws? If so, take the screws out and then slide the entire assembly out.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

State select gas water heater model pr675xrvit has no power to gas valve. [ 1 Answers ]

The water heater quit working. I found that water supply was leaking so I tightened the connection and that fixed the leak. Now there is no power to the gas valve. I checked power at toggle switch and all is good. When looking at igniter I encountered water at the flame sensor and the insulation...

Rheem gas water heater model 21v40-38 age of unit [ 1 Answers ]

How old is this unit?

Change natural gas unit heater to lp gas [ 2 Answers ]

How do I change natural gas unit heater to LP gas

I have a Dearborn Gas wall heater?Age [ 0 Answers ]

I have a Dearborn Gas wall heater?Age Model #DWF-35BU-1 serial #35832

Need info about Dearborn DVF-65B-N upright furnace [ 2 Answers ]

Specifically looking for a circuit diagram, with specs. Technician replaced a 2-stage blower motor but full proper function wasn't returned. Next he starts mucking about with the thermal switches, replaced one that he dubbed "obsolete", and may have shuffled either of the remaining 2. Regardless,...

View more questions Search