Ask Experts Questions for FREE Help !
Ask
    Outsiderx's Avatar
    Outsiderx Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 1, 2014, 11:48 AM
    Rheem Furnace not working
    I have a Rheem UpFlow RGPJ-07EAUER. Noticed it was not working when room temp was well below set point. Went down staris and looked at the furnace and it was doing nothing. Except for a very small faint humming. Looked at the lights on board. (One Green "OK" LED, and one yellow "Flame" LED)
    Green light comes on and stays on.
    Yellow light never attemps to come on and stays off.
    Changed out the board, and also the inducer motor. Inducer motor still does not come on. Is this the first thing that should happen once I set the set point and turn the heat on? I never notice the ignitor coming on or flames at all in the unit. I am pretty confused and any help would be appreciated.
    bitters's Avatar
    bitters Posts: 348, Reputation: 12
    Full Member
    		  
    #2

    Nov 1, 2014, 03:19 PM
    Yes combustion blower should start first. If you have a voltmeter check to see if you have power to the blower.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dual fuel rheem furnace not working, defrost control board replaced still not working [ 1 Answers ]

Hello there, I have a Rheem furnace and is only one year old. Recently my furnace didn't come on so I had someone come out and look at it and it turns out it was the defrost board on the heat pump that was bad. I replaced the board with a new one and turned the system on and it worked on heat and...

Heat,Rheem Furnace blower not working [ 6 Answers ]

HELLO, JUST CAME HOME IN NJ TO FIND HEAT NOT WORKING. FURNACE IS A RHEEM CLASSIC 90, MODEL#rcba-3765gg21x1. Have power to unit, breaker is on, when I depress covers interlock switch, LEDs light briefly & I can hear what sounds like a burner starting. Blower does not come on. Verified Thermostat...

Rheem Heap pump not working [ 1 Answers ]

I know somebody that has a Rheem Imporial Classic Heat Pump or something like that. And the compressor stopped running should he replace the compressor or should he fix it. The compressor was installed in the year 89' with the Rheem/Honeywell T87 with single stage option. The indoor coil/air...

Iceco, rheem, weather king furnace not working [ 2 Answers ]

2 year old rheem weather king with no prior problems suddenly stopped working. Model #80pj07ear01. Tried the restart as suggested in the manual. Any other ideas short of calling in a service person

Two year old Rheem Not Working! [ 2 Answers ]

I have a two year old Rheem Split Unit. The first summer the Fan motor on the compressor stop working. The person how installed it said that the oil in the fan leaked out. Now this summer it has done the same thing again. I can hear a HUM but compressor and fan are not running. The air handler is...

View more questions Search