Ask Experts Questions for FREE Help !
Ask
    ysav's Avatar
    ysav Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 29, 2014, 05:28 PM
    Replacment fan blades for ceiling fan
    I have 2 ceiling fans littleton by hampton bay model 270614 I need to replace the blades where can I buy them ?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Oct 30, 2014, 04:59 PM
    Check with Home Depot or online here.
    http://www.google.com/url?sa=t&rct=j...78677474,d.eXY
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    Oct 30, 2014, 05:21 PM
    Yep, ma gave good advice. Brand of fan doesn't matter much replacement blades are mosr often universal but not all. Keep in mid this is a very inexpensive fan which can be totally replaced for about $24 http://www.sensetosustain.com/270614...amptonbay.html
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay fan flywheel for crystal 1988 ceiling fan 5 blades [ 1 Answers ]

Does any one know where I could get a fly wheel for a 1988 Hampton bay crystal 5 light blade fan?

Harbor Breeze Double Ceiling Fan with Remote and Light-Are the fan motors/ blades rev [ 1 Answers ]

Is it possible to reverse the blades on the Harbor Breeze double fan with remote control?

Ceiling fan bracket + blades [ 0 Answers ]

Wanting to know where I can get ceiling fan bracket + blades for AIM 132cm fan

Ceiling fan blades not spinning [ 4 Answers ]

I've turned the on/of switch & pulled the chord both ways but the blades on my craftmade ceiling fan is not spinning. What could be the problem?

Ceiling fan blades catch on casing for light below. Can I adjust blades to raise them [ 1 Answers ]

Hi. I installed my Kendal ceiling fan and light but the blades won't turn on their own. The motor hums and if I turn the blades to get it going they turn, but there is a hideous grinding noise as the blades rub against the light casing below. Is there any way to adjust the blades so it will turn...

View more questions Search