Ask Experts Questions for FREE Help !
Ask
    Mollymcclure's Avatar
    Mollymcclure Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 15, 2014, 12:53 PM
    Hampton bay fan flywheel for crystal 1988 ceiling fan 5 blades
    Does any one know where I could get a fly wheel for a 1988 Hampton bay crystal 5 light blade fan?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Oct 15, 2014, 04:10 PM
    Not worth the time and effort. It is 26 yrs. Old. You say flywheel, never saw a flywheel, the motor acts as such, but is that what you want or is it the rubber connector joint?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay Ceiling Fan - Fan OK, Lights Dim if turned on after fan [ 3 Answers ]

Installed a Hampton Bay 52" ceiling fan with light powered by remote unit. Fan works perfectly with remote. Lights work perfectly if you turn them on before the fan. However, if you turn the fan on first, then the lights, the lights will only come on dim. Ive checked and rechecked connections-...

Hampton bay fan blades [ 1 Answers ]

We need replacement fan blades for outside fans. The metal part that you attach the blades to has screws with 3 3/4" and 3" spacing with an elongated hole. They are Hampton Bay

Hampton Bay ceiling fan/light. Where does the ground wire attach to the fan? [ 2 Answers ]

Where does the ground wire attach to the fan?

Ceiling fan blades and screws for Hampton Bay Romanesque Model 233798 [ 2 Answers ]

I would like to know where I can purchase five 52 inch fan blades (new or used) and screws for a Hampton Bay Romanesque Model 233798 ceiling fan.

Hampton Bay Ceiling fan blades will only go in one direction [ 1 Answers ]

I have a Hampton Bay Ceiling Fan that has a switch at the top to turn the fan blades to the left (cool in summer) or right (warm in summer). When I turn the switch to the left the blades will not turn. The instruction manual says there are 16 different codes combinations. Is there a special code...

View more questions Search