 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
The igniter will ignite the gas, and the gas will run for a second or a few seconds and will then cut off. It will continue to cycle like this until it finally will stay on but at times will take forever.
Have a rheem criterion 2 gas furnace (1X2000), our gas was out for three days (Tucson Az ) Now it’s back on, and both furnaces start and stop about ever 4 to 10 minutes
My Frigidaire gas furnace has 3 burners that ignite for a couple of seconds then shuts off. The electric ignition and fan works fine, it's just the burners that turns off after a few seconds. If I try turning the furnace on and off a few times it sometimes fires up and stays on. I have tried...
My Frigidaire gas furnace has 3 burners that ignite for a couple of seconds then shuts off. The electric ignition and fan works fine, it just the burners that turns off. If I try turning the furnace on and off a few times it sometimes fires up and stays on.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
