Nordyne furnace E2EB-017HB need contactors part numbers

rjd2499 Posts: 1, Reputation: 1

New Member

Oct 12, 2014, 09:20 PM

Nordyne furnace E2EB-017HB need contactors part numbers

The contactors are making a loud buzzing sound, was going to just replace them.

bitters Posts: 348, Reputation: 12

Full Member

Oct 13, 2014, 07:55 AM

I would check the transformer, make sure it is putting out at least 24V.

Add your answer here.

Check out some similar questions!

Wiring diagram for a Nordyne E2EB-017HB [ 1 Answers ]

My unit will heat but it will not blow. What should I do?

Nordyne model E2EB-017HB [ 2 Answers ]

Unit will not heat. Replace t stat and both magnetic contactors. Have 28 volts to red and yellow on t stat. what else can I check?

Intertherm furnace e2eb-017hb runs briefly, shuts off, then furnace just clicks [ 3 Answers ]

I have an Intertherm furnace, e2eb-017hb. It comes on briefly, blows warm air, then shuts off, and a clicking sound comes from the coil contacts area. I have tested the t-stat, and also replaced a coil contact, thinking that was the problem. I would appreciate any help on what to do next.

Nordyne e2eb-15hb furnace : [ 2 Answers ]

my furnace thermostat displays all modes & the letters HP when trying to go into emergecy heat( 15kw electric)

Nordyne e2eb-017HB blower will not stay on more than a minute [ 6 Answers ]

Nordyne e2eb-017HB. Replaced blower motor, capacitor, both fan relays, contactor &, transformer in the inside unit. The compressor and fan outside runs. Inside blower will come on with auto set on t-stat to cool, for about a minute, then shuts off, for another 7 minutes, then comes back on. The...