Ask Experts Questions for FREE Help !
Ask
    Rodallg's Avatar
    Rodallg Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 4, 2014, 03:16 PM
    Lights not working.
    Problem is that three lights from three switches are not working in my bathroom.
    I checked the GFI's, tested and reset them.
    All other switches and plugs work in the house.
    I checked the voltage at the switches and they come out to 108.8 vac, while others that work are 122 vac.
    What can the experts here tell me? Change switches, GFI's, etc.
    Thanks
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Oct 4, 2014, 08:12 PM
    How are you doing the voltage check? Are you checking between the incoming hot at the switches and the ground. Lights are not normally on GFI's. These are not dimmer switches are they?

    Are the switches wired using the screw terminals or the quick connect holes in the back of the switches?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Tail lights dash lights parking lights quit working [ 1 Answers ]

But turn signals work brake lights work radio works fuse and bulbs are good

Jaguar dash board lights not working as well as my rear running lights which relay I? [ 2 Answers ]

Tail lights and dash light not working but brake lights are and fuses are good [ 0 Answers ]

I have a 1973 chevy impala custom n my tail light and dash lights are not working and my fuses and bulbs are good

Tail lights and dash light not working but brake lights are and fuses are good [ 0 Answers ]

Tail lights or signal lights not working but break lights are [ 6 Answers ]

Can someon help I have no dash signals or tail lights but I have brake lights an head lights

View more questions Search