Ask Experts Questions for FREE Help !
Ask
    hydranha37's Avatar
    hydranha37 Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 15, 2014, 08:23 AM
    Installing a thermostat
    I have three wires coming to the thermostat,two white and one black, and three terminals labled w,r,and y.how can I connect them?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Sep 15, 2014, 01:13 PM
    How about telling us what brand and model?
    bitters's Avatar
    bitters Posts: 348, Reputation: 12
    Full Member
     
    #3

    Sep 15, 2014, 01:30 PM
    Yea, what ma0641 said. Is there a G terminal on the stat?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Installing thermostat [ 0 Answers ]

Trying to install honeywell rth7000 to 5 wire Carrier heat pump. Red blue green yellow and white wires

Installing new thermostat [ 8 Answers ]

Im trying to instal my Ritetemp thermostat and none of the variations of my4 wires are on the directions. I have an RC,W,Y,and G. The white,yellow, and green wires were connected to the original thermostat as W,Y.and G. Easy enough. My red wire was connected to RC and it also had a red jumper wire...

Installing Thermostat [ 1 Answers ]

I am installing a thermostat but the wiring does not match up.I have 2 sets of wires, same colors coming from the unit. The colors are red,white,and blue. What goes where

Installing thermostat [ 1 Answers ]

I'm installing a honeywell rth110b thermostat and I can't tell how to hook up the wires. Do they go in from the bottom, top or where? The picture/instructions are not clear. Also is there a switch to flip for the jumper thing? Thanks

Installing a thermostat [ 1 Answers ]

When you put a new thermostat in is it easy to install do you just put the green wire were the g is and the red wire were the r is and so on?


View more questions Search